Water treatment with foresight for sustainable quality of life

Pre-filter set for ProfiLine 220 / 330 GPDStage 1: Sediment filter 1 micron Area of application: Sediment removal of sand, silt, rust and suspended matter (suspended solids) from drinking water. Properties: Ensures exceptional dirt holding capacity and low pressure losses Material: 100% pure polypropylene, without additives Filter material is therefore surfactant-free and contains no resin binders, lubricants, antistatic agents, release agents or other chemical additives. Stage 2: Activated carbon filter Area of application: Filtering particles from tap water Reduction of chlorine and other impurities such as organic compounds (VOCs) and dirt from tap water Reduces undesirable tastes and odours Material: Mixture of mixed activated carbon and special media Stage 3: Carbon block filter Area of application: Reduces the concentration of chlorine and organic compounds (VOCs) in tap water Counteracts bad taste and odour Properties: The high porosity of the carbon prevents the cartridge from clogging before its absorption capacity is exhausted, maximising the use of the carbon, while maintaining a low pressure drop. Improves drinking water quality through resin water softening process based on cation exchange. Material: Precise combination of mixed granular activated carbon (GAC) media mixed mild media of activated coconut, bituminous carbon and other advanced mixed filter media for effective water treatment

PureConduct™ Universal - dual-ion conductance formula for precise colloid production With OsmoUnity® PureConduct™ Universal, you can set the desired conductance of your ultrapure water or osmosis water in a targeted and controlled manner. The specially developed conductivity solution is ideal as a defined starting point for the production of a wide range of colloids. Normal tap water often contains fluctuating amounts of lime, minerals and other dissolved substances. These can influence the production process and lead to inconsistent results. PureConduct™ Universal helps you to start with almost pure water and then raise the conductivity to the desired range. The Universal version has been developed for a wide range of applications and is particularly suitable for many metals used for technical purposes and general applications. Suitable for the following colloids ✔ Copper (Cu)✔ Zinc (Zn)Nickel (Ni)✔ Cobalt (Co)✔ Iron (Fe)✔ Manganese (Mn)✔ Chromium (Cr)Titanium (Ti)✔ Vanadium (V)Molybdenum (Mo)✔ Tungsten (W)Tin (Sn)Bismuth (Bi)Antimony (Sb)Gallium (Ga)Indium (In)✔ Mixed colloids and other technical applications Your advantages at a glance ✔ Targeted conductivity increase of ultrapure water & osmosis water✔ Controllable and reproducible output values✔ Ideal for the production of a wide range of colloids✔ Simple dosing with integrated pipette✔ Very economical and economical to use✔ High-quality raw materials for precise results Easy to use Provide ultrapure water / osmosis water Dose drop by drop with the pipette Measure conductivity Achieve target value Suitable for Ideal for users who value defined water values, repeatability and ease of use in colloid production. Contents 30 ml glass bottle with pipette

OsmoUnity® PureConduct™ Smart Set - Universal, Noble & conductivity meter in a complete package With the OsmoUnity® PureConduct™ Smart Set, you get everything you need for the targeted adjustment of the conductivity of ultrapure water or osmosis water. The set combines PureConduct™ Universal, PureConduct™ Noble anda practical conductivity meter (ppm) for maximum control and reproducible results. This means you always have the right conductivity solution for different applications and can quickly and easily check the current ppm value of your water. Normal tap water often contains fluctuating amounts of lime, minerals and other dissolved substances. These can influence the production process. With the Smart Set, you can start with almost pure water and then adjust the desired water values in a targeted and controlled manner. Included in the set ✔ 1x OsmoUnity® PureConduct™ Universal - 30 ml glass bottle with pipette✔ 1x OsmoUnity® PureConduct™ Noble - 30 ml glass bottle with pipette✔ 1x conductivity meter for measurement in ppm Suitable for the following applications Universal:✔ Copper (Cu)✔ Zinc (Zn)✔ Nickel (Ni)✔ Iron (Fe)✔ Cobalt (Co)✔ Mixed colloids and other applications Noble:✔ Silver (Ag)✔ Gold (Au)✔ Platinum (Pt)✔ Palladium (Pd)✔ Mixed colloids with precious metal content Your advantages at a glance ✔ Complete set with two conductivity solutions and measuring device✔ Check ppm values quickly and easily✔ Maximum flexibility for various applications✔ Targeted adjustment of ultrapure water & osmosis water✔ Simple dosing with integrated pipette✔ Controllable and reproducible results Simple application Provide ultrapure water / osmosis water Select the desired solution Dose drop by drop Check ppm value with measuring device Achieve target value Suitable for Ideal for users who want to be ready to go straight away and want to use a practical measuring device for checking in addition to the appropriate conductivity solutions. Contents 2 x 30 ml glass bottles with pipette1 x conductivity meter (ppm)

PureConduct™ Noble - finely tuned premium sulphate matrix for precise colloid production With OsmoUnity® PureConduct™ Noble, you can adjust the desired conductance of your ultrapure water or osmosis water in a targeted, finely dosed and controlled manner. The specially formulated premium conductivity solution was developed for demanding applications where precision and reproducible results are paramount. Normal tap water contains different amounts of lime, minerals and other dissolved substances depending on the region. These fluctuating initial values can influence the manufacturing process. PureConduct™ Noble helps you to start with almost pure water and then raise the conductivity to the desired range. The Noble version is particularly suitable for sensitive applications and for metals where a finer conductivity setting is preferred. Suitable for the following colloids ✔ Silver (Ag)✔ Gold (Au)✔ Platinum (Pt)✔ Palladium (Pd)Rhodium (Rh)Iridium (Ir)✔ Ruthenium (Ru)✔ Mixed colloids with precious metal content✔ Other precise special applications Your advantages at a glance ✔ Finely tuned conductivity increase of ultrapure water & osmosis water✔ Ideal for low and precise conductivity ranges✔ Controllable and reproducible output values✔ Simple dosing with integrated pipette✔ Very economical and economical to use✔ High-quality raw materials for demanding applications Easy to use Provide ultrapure water / osmosis water Dose drop by drop with the pipette Measure conductivity Set target value precisely Suitable for Ideal for users who place the highest demands on water quality, precision and repeatability in colloid production. Contents 30 ml glass bottle with pipette

Place of use: suitable for: 2 and 3 water filters second and third filter housing Area of application: Reduces bacteria and viruses, sediment, rust, suspended particlesup to 98% Reduces odour impairments Improves the flavour of the water Pre-filtering of tap water for a wide range of applications where very fine pre-filtration is required. Properties: High absorption capacity low pressure loss material: Ceramic Activated carbon block Instructions for use: The filter must be cleaned at least once a month, or every 1-2 weeks in the case of heaviersoiling. Rinse and clean the filter with a soft pad under runningclear water. Do not use any cleaning agents

Place of use: suitable for: 2 and 3 water filters second or third filter housing Area of application: Reduces bacteria and viruses, sediment, rust and suspended particlesup to 98% Pre-filtering of tap water for a wide range of applications where very fine pre-filtration is required. Properties: high absorption capacity low pressure loss material: Ceramic Instructions for use: The filter must be cleaned at least once a month, or every 1-2 weeks in the case of heavysoiling. Rinse and clean the filter with a soft pad under runningclear water. Do not use any cleaning agents

Angle screw-in connector 3/8 inch O-rings - 3/8 inch connector For water, liquids, beverages and compressed air Material POM and EPDM seal Temperature range 1°C to 98°C NSF and ACS certification, food approval, W270 KTW

Solenoid valve - Precise control for your osmosis system The solenoid valve is an essential component of reverse osmosis systems and works in combination with the high and low pressure valves. It ensures automatic control of the water flow by opening or closing the passage on command. This efficiently starts or stops the operation of the booster pump to ensure your system runs smoothly and safely.

High pressure switch ¼ inch - Automatic switch-off for osmosis systems with booster pump Prevent unnecessary pump operation and protect your osmosis system! The high-pressure switch ensures that the booster pump switches off automatically. This prevents continuous operation of the pump, which can lead to long-term damage to your reverse osmosis system. Product features: Universal compatibility - Suitable for all reverse osmosis systems and water filter systems Effective protection - Prevents the pump from running through Automatic switch-off - Protects the booster pump and extends its service life Easy installation - 2x ¼ inch plug connections for quick connection Safe and reliable - Includes 2 blue safety clips for a secure connection Scope of delivery: 1x Aquintos high pressure switch 2x safety clips (¼" Quick & Easy connection) Ensure safe and efficient operation of your osmosis system - with the OsmoUnity high pressure switch!

Low pressure switch ¼ inch - Reliable switch-off for osmosis systems with booster pump Prevent damage to your osmosis system due to prolonged pump operation! The low pressure switch automatically switches off the booster pump as soon as the water pressure is too low. This prevents the pump from running continuously and damaging your reverse osmosis system. Product description: Compatibility - Universally applicable for all reverse osmosis systems and water filter systems Function - Automatic switch-off of the booster pump at low water pressure Protection - Prevents dry running and extends the service life of your osmosis system Easy installation - ¼ inch plug connections for quick and safe installation Scope of delivery - 1x OsmoUnity low pressure switch incl. 1x blue fuse clip Ensure the safe and reliable operation of your osmosis system - with the Osmounity low pressure switch!

This short-arm 3-way tap combines functionality and high-quality materials with style and convenience - ideal for modern and healthy living. 3-in-1 function This elegant tap combines three practical functions in one: Cold and hot water can be regulated as usual using the top lever. Pure water from your water filter system can be conveniently obtained by pressing the lower lever. Thanks to the two separate water supply lines inside the tap, your pure, filtered water does not come into contact with your tap water. Practical and elegant design The space-saving base makes the tap ideal for smaller washbasins. The 360° swivelling arm offers versatile usage options and flexible cleaning angles. The fine, net-shaped water jet regulator ensures a smooth and even flow of water. Rounded edges give the tap a timeless design, are pleasant to the touch and protect against injury. High-quality design High-quality materials ensure safe and long-lasting use. The switch for hot, cold and ultrapure water is equipped with hard-wearing ceramic coils. The two separate water supply lines guarantee hygienic purity.