Field of application:
for cold water filtration up to 25°C
Ideal for use as a reverse osmosis pre-filter or post-filter.
Efficiently reduces chlorine, organic substances (VOCs) and certain pesticides.
Reduction of chlorine taste and odour
Properties:
Optimum utilisation of the filter material thanks to the high porosity of the carbon.
This prevents the cartridge from clogging before its absorption capacity is exhausted and ensures a low pressure drop.
and a low pressure drop is guaranteed.
Material:
precise combination of mixed granular activated carbon media (GAC) for high adsorption capacity
mixed mild media of activated coconut, bituminous carbon
and other advanced mixed filter media for effective water treatment.
Field of application:
For water filtration up to 25°C
Sediment absorption of sand, silt, rust and suspended solids from drinking water.
Properties:
Exceptional dirt holding capacity
low pressure loss
Material:
100% pure polypropylene, without additives
Filter material is therefore surfactant-free and contains no resin binders, lubricants, antistatic agents, release agents or other chemical additives.
Use:
For customising with various 10 inch filter media,
e.g.: Sediment filter, activated carbon filter, carbon block filter, resin filter.
Place of use:
ProfiLine osmosis/ultrafiltration pre-filter
Housing can also be used individually in water filtration.
Material:
PP filter head/PET filter bowl
2 sealing rings, NBR material for maximum tightness
Technical data
Size: 10 inch
Connection thread: 2 x 1/4 inch
Housing spanner: 10 inch housing spanner
Working pressure: max. 6 bar
Note:
Approval for use with drinking water
Manufactured in the EU from high-quality materials
Use:
For customising with various 10 inch filter media,
e.g.: Sediment filter, activated carbon filter, carbon block filter, resin filter.
Place of use:
ProfiLine osmosis/ultrafiltration pre-filter
Housing can also be used individually in water filtration.
Material:
PP filter head/filter bowl
2 sealing rings, NBR material for maximum tightness
Technical data
Size: 10 inch
Connection thread: 2 x 1/4 inch
Housing spanner: 10 inch housing spanner
Working pressure: max. 6 bar
Note:
Approval for use with drinking water
Manufactured in the EU from high-quality materials
Application:
for equipping with osmosis membrane 50 to 200 GPD
for equipping with ultrafiltration membrane
Place of use:
SmartLine osmosis/ultrafiltration
ProfiLine osmosis/ultrafiltration
and also for all commercially available osmosis systems in membrane sizes 50 - 200 GPD
material:
Reinforced PP
2 sealing rings, NBR material for maximum tightness
Technical data:
Size: 2.5 inch / 55x315mm
Connection thread: 3 x 1/8 inch
Housing spanner: 2.5 inch housing spanner
Working pressure: max. 6 bar
Note:
Approval for use with drinking water
Manufactured in the EU from high-quality materials
Utilisation:
For independent filling with various filter media,
e.g.: Carbon, resins, sediment filter, carbon block.
Place of use:
Pre-filter and post-filter/additional filter for SmartLine osmosis/ultrafiltration
Afterfilter/additional filter for ProfiLine osmosis/ultrafiltration
Housing can also be used individually for water filtration,
and can be filled with other materials, e.g: Peat, zeolite, mineral stones.
Material:
Filter housing PET
1 Sealing rings, NBR material for maximum tightness
2 filter sieves PP
2 filter sponges
Technical data:
Size: 2.5 inch x 12 inch
Connection thread: 2 x 1/4 inch
Housing spanner: no housing spanner, can be screwed on manually
Working pressure: max. 6 bar
Filling capacity: 0.5 litres
Note:
Approval for use with drinking water
Manufactured in the EU from high-quality materials
€14.70*
This website uses cookies to ensure the best experience possible. More information...
