Filters

category.description

Ceramic filter 0.5 micron

Place of use: suitable for: 2 and 3 water filters second or third filter housing Area of application: Reduces bacteria and viruses, sediment, rust and suspended particlesup to 98% Pre-filtering of tap water for a wide range of applications where very fine pre-filtration is required. Properties: high absorption capacity low pressure loss material: Ceramic Instructions for use: The filter must be cleaned at least once a month, or every 1-2 weeks in the case of heavysoiling. Rinse and clean the filter with a soft pad under runningclear water. Do not use any cleaning agents

€18.75*

Ceramic activated carbon block filter 0.5 micron

Place of use: suitable for: 2 and 3 water filters second and third filter housing Area of application: Reduces bacteria and viruses, sediment, rust, suspended particlesup to 98% Reduces odour impairments Improves the flavour of the water Pre-filtering of tap water for a wide range of applications where very fine pre-filtration is required. Properties: High absorption capacity low pressure loss material: Ceramic Activated carbon block Instructions for use: The filter must be cleaned at least once a month, or every 1-2 weeks in the case of heaviersoiling. Rinse and clean the filter with a soft pad under runningclear water. Do not use any cleaning agents

€29.60*

SpringVital OU1

Place of use: Suitable for: SpringVital series Filter type: Suitable for mechanical coarse and particle filtration Removes coarse particles such as sand, rust and suspended matter Pore size: 10 micron Material: Activated carbon fibres Capacity: Up to 10,000 litres depending on water quality Change interval: Every 6 months on average Recommended water pressure: 2 to 6 bar Operating temperature: +5°C to +38°C

€32.95*

SpringVital OU2

Place of use: Suitable for: SpringVital series Filter type: Fine filtration with activated carbon Removes chlorine, organic compounds and impuritiesReduces heavy metals such as lead, copper, iron Pore size: 3 microns Material: Activated carbon made from coconut shells Capacity: Up to 6,000 - 8,000 litres depending on water quality Change interval: Every 6 months on average Recommended water pressure: 2 to 6 bar Operating temperature: +5°C to +38°C

€29.95*

SpringVital OU3

Place of use: Suitable for: SpringVital series Filter type: Fine filtration with activated carbon Removes chlorine, organic substances, pesticides, herbicides and heavy metals such as lead, copper, iron Pore size: 5 micron Material: Activated carbon from coconut shells Capacity: Up to 6,000 - 8,000 litres depending on water quality Change interval: Every 6 months on average Recommended water pressure: 2 to 6 bar Operating temperature: +5°C to +38°C

€28.95*

SpringVital OU7

Place of use: Suitable for: SpringVital series Filter type: Activated carbon block Removes chlorine, heavy metals such as lead, copper, ironorganic impurities, improves the flavour Pore size: 0.8 micron Material: Activated carbon from coconut shells Capacity: Up to 6,000 - 8,000 litres depending on water quality Change interval: Every 6 months on average Recommended water pressure: 2 to 6 bar Operating temperature: +5°C to +38°C

€32.70*

Carbon block filter Gold Edition

Location: Suitable for: PressureLine/ProfiLine osmosis systems and all common 10 inch systems 3. pre-filter housing Field of application: Reduces the concentration of chlorine and organic compounds (VOCs) in tap water Counteracts bad taste and odour Properties: The very high porosity of the carbon prevents the cartridge from clogging before its absorption capacity is exhausted, maximising the use of the carbon while maintaining a low pressure drop. Improvement of drinking water quality through maximum utilisation of the carbon Material: precise combination of mixed granular carbon block mixed mild media activated coconut, bituminous coal and other advanced mixed filter media for highly effective water treatment.

€19.30*

Carbon block filter for SmartLine

Field of application: for cold water filtration up to 25°C Ideal for use as a reverse osmosis pre-filter or post-filter. Efficiently reduces chlorine, organic substances (VOCs) and certain pesticides. Reduction of chlorine taste and odour Properties: Optimum utilisation of the filter material thanks to the high porosity of the carbon. This prevents the cartridge from clogging before its absorption capacity is exhausted and ensures a low pressure drop. and a low pressure drop is guaranteed. Material: precise combination of mixed granular activated carbon media (GAC) for high adsorption capacity mixed mild media of activated coconut, bituminous carbon and other advanced mixed filter media for effective water treatment.

€13.75*

Sediment filter for SmartLine

Field of application: For water filtration up to 25°C Sediment removal of sand, silt, rust and suspended solids from drinking water. Properties: Exceptional dirt holding capacity low pressure losses Material: 100% pure polypropylene, without additives Filter material is therefore surfactant-free and contains no resin binders, lubricants, antistatic agents, release agents or other chemical additives, antistatic or release agents or other chemical additives.

€11.30*

Sediment filter 10 inch

Place of use: Suitable for: ProfiLine osmosis systems and all standard 10 inch systems 1st and 2nd pre-filter housing Area of application: Sediment removal of sand, silt, rust and suspended solids from drinking water. Properties: Ensures exceptional dirt holding capacity and low pressure losses Material: 100% pure polypropylene, without additives Filter material is therefore surfactant-free and contains no resin binders, lubricants, antistatic agents, release agents or other chemical additives.

From €5.99*

Details

Sediment/activated carbon filter 10 inch

Place of use: Suitable for: ProfiLine ultrafiltration and all standard 10 inch systems 1. pre-filter housing Area of application: Sediment filtration unit (1 filter stage): Sediment absorption of sand, silt, rust and suspended solids from drinking water Activated carbon filtration unit (2 filter stages): Removes water impurities such as chlorine, total organic carbon (TOC), pharmaceuticals, turbidity, volatile organic chemicals (VOCs), herbicides, industrial solvents, insecticides, pesticides and chemicals, that cause bad taste, odours and more. Features: Durable and reliable, vacuum sealed and fully lined with a polypropylene sleeve, a thermally bonded cap and an industrially sealed silicone ring Material: Polypropylene cover high-quality, granular coconut shell activated carbon (GAC), NSF-approved, for maximum chemical absorption Filter material is surfactant-free and contains no resin binders, lubricants, antistatic or release agents or other chemical additives.

€12.10*

Activated carbon 10 inch

Place of use: Suitable for: ProfiLine osmosis systems and all common 10 inch systems 2. pre-filter housing Area of application: Removes larger impurities from drinking water Removes water impurities such as chlorine, total organic carbon (TOC), pharmaceuticals, turbidity, volatile organic chemicals (VOC), herbicides, industrial solvents, insecticides, pesticides and chemicals, bad tastes and odours Characteristics The filter is vacuum sealed and complete with a polypropylene cover, a thermally bonded cap and an industrially sealed silicone ring, which ensure durability and reliability. Material High quality coconut charcoal for maximum chemical adsorption granular activated carbon medium

€9.80*

Activated carbon

Location: Suitable for: ProfiLine osmosis systems and all common 10 inch systems 2. pre-filter housing Area of application: Reduces the concentration of chlorine and organic compounds (VOCs) in tap water Counteracts bad taste and odour Properties: The high porosity of the carbon prevents the cartridge from clogging before its absorption capacity is exhausted, maximising the use of the carbon while maintaining a low pressure drop. Improved drinking water quality through cation exchange based resin water softening process. Material: Precise combination of mixed granular activated carbon (GAC) media blended mild media of activated coconut, bituminous carbon and other advanced mixed filter media for effective water treatment.

€7.80*

Carbon block filter

Place of use: Suitable for: ProfiLine osmosis systems and all common 10 inch systems 3. pre-filter housing Field of application: Ideal for use as a reverse osmosis pre-filter or post-filter Water softening, iron reduction Significant reduction of chlorine and organic compounds (VOCs), which improves the taste and odour of drinking water Protection against bacteria and viruses thanks to nanosilver Properties: The high porosity of the carbon prevents the cartridge from clogging before its absorption capacity is exhausted, maximising the use of the carbon, while maintaining a low pressure drop. Granulated GAC activated carbon media for better reduction of chlorine taste and odour, as well as high adsorption capacity. Equipped with nanosilver BACINIXTM for protection against bacteria and viruses. Material: Mixed granular activated carbon media Mixed media activated coconut, bituminous carbon and other advanced mixed filter media for particularly effective water treatment, with antimicrobial/antibacterial nanosilver technology - BACINIX.

€14.20*

Details

Carbon block 10 inch

Place of use: Suitable for: ProfiLine osmosis systems and all common 10 inch systems 3. pre-filter housing Area of application: Reduces the concentration of chlorine and organic compounds (VOCs) in tap water Counteracts bad taste and odour Properties: The high porosity of the carbon prevents the cartridge from clogging before its absorption capacity is exhausted, maximising the use of the carbon, while maintaining a low pressure drop. Improves the quality of drinking water. Material: Precise combination of mixed granular activated carbon (GAC) media mixed mild media activated coconut, bituminous carbon and other advanced blended filter media for effective water treatment.

€9.80*

Water softening filter 10 inch (ion exchanger)

Location: Suitable for: ProfiLine osmosis systems and all common 10 inch systems 2. pre-filter housing Area of application: Suitable for installation in the pre-filter area and in the post-filter area Reduces water hardness by reducing the concentration of calcium and magnesium ("hardness minerals") Prevents limescale deposits Counteracts possible membrane damage caused by excessively hard water Material: Strongly acidic sodium-based ion exchange resin, FDA quality, Precise media consisting of a cation-based exchange resin Note: If there is a high concentration of suspended solids in your tap water, a sediment filter should be installed upstream of this filter upstream of this filter to prevent the water softening filter from being impaired.

€14.50*

Iron reduction filter 10 inch

Place of use: Suitable for: ProfiLine osmosis systems and all common 10 inch systems 2. pre-filter housing Area of application: Suitable for installation in the pre-filter area and in the post-filter area pH adjustment of the drinking water Reduction of the iron and manganese concentration Reduction of metallic flavour of the drinking water Material: NSF-approved advanced mixed filtration media for more effective water treatment Precisely matched combination of double bed media Note: If there is a high concentration of suspended solids in your tap water, a sediment filter should be installed upstream of this filter to prevent interference with the iron reduction/water softening filter.

€13.20*

Activated carbon / KDF 10 inch

Location: Suitable for: ProfiLine osmosis systems and all common 10 inch systems 2. pre-filter housing Area of application: For installation in the pre-filter area Reduces the concentration of iron and hydrogen sulphide Reduces heavy metals (lead, arsenic, etc.) Inhibits bacterial growth Reduces the metallic flavour of drinking water Material: NSF-approved advanced mixed filtration media for more effective water treatment Precisely matched combination of dual bed media Note: If there is a high concentration of suspended solids in your tap water, a sediment filter should be installed upstream of this filter

€14.30*

Anti-lime carbon 10 inch

Location: Suitable for: ProfiLine osmosis systems and all common 10 inch systems 2. pre-filter housing Area of application: For installation in the pre-filter area Removal of chlorine and organic compounds Strong inhibition of limescale formation processes Reduction of calcium, magnesium, iron and manganese concentrations Reduction of the metallic flavour of drinking water Material: NSF-approved advanced mixed filtration media for more effective water treatment Note: If there is a high concentration of suspended solids in your tap water, a sediment filter should be installed upstream of this filter

€13.50*

Empty cartridge for 10 inch housing

Empty, transparent cartridge refillable Free choice of filter media Can be used in 10 inch filter housings Filling capacity approx. 0.7 litres Range of application: Can be filled with resins, granular activated carbon or a special filter medium of your choice. Features: Enables the use of a wide range of media by refilling End caps with thread for screwing on Pre- and post-filtration pads prevent media migration and provide a high quality permeate pre-filter Material: hard-wearing, highly transparent PET material

€11.20*

Carbon block with sediment filter

Field of application: reduces the concentration of chlorine and organic compounds in tap water counteracts bad taste and odour Properties: a specific combination of an outer and an inner layer consisting of sediment filter and activated carbon block respectively a low pressure drop is maintained. an antimicrobial agent that provides protection against bacteria and viruses and improves the continuous supply of fresh and clean drinking water. Material: precise combination of mixed granular activated carbon media and sediment unit mixed mild media of activated coconut, bituminous carbon and other advanced mixed filter media for effective water treatment.

€18.20*

Sediment wrap filter

Place of use: Suitable for: 2 and 3 water filters and all standard 10 inch systems 1st, 2nd and 3rd pre-filter housing Area of application: Drinking water, well water and rainwater Sediment absorption of sand, silt, rust, suspended and solid matter, microplastics. Properties: The sediment wrap filter series uses polypropylene as a filter material to effectively remove particles of various sizes from the water, which ensures the water flow and constantly provides fresh and pure drinking water. These filter elements are manufactured in a continuous process from polypropylene, which is free from surfactants and does not require the use of additional chemicals such as binders, flow aids or separating agents. Material: The filter elements are made entirely of high-quality polypropylene fibre, which is carefully spun around a reinforcing central core. These elements are characterised by their excellent resistance to chemical influences and temperature fluctuations. Manufactured from polypropylene material that has received FDA approval and wrapped around a polypropylene core, these filters provide a reinforced structure. They are known for their extensive chemical compatibility, their robustness against temperature differences and their cost-effectiveness. Typically, these filter cartridges are primarily used for the initial filtration stage of cold drinking water.

From €7.50*

Details

Der Vorfilter: Eine essenzielle Komponente von Wasseraufbereitungssystemen

Ein Vorfilter ist ein wesentlicher Bestandteil vieler Wasseraufbereitungssysteme und übernimmt eine entscheidende Rolle bei der Filterung von Trinkwasser. Er dient als erste Filtrationsstufe, um grobe Partikel, Sand, Schmutz und andere größere Verunreinigungen aus dem Wasser zu entfernen, bevor es zu den feineren Filtern wie der Umkehrosmosemembran oder Aktivkohlefiltern gelangt. Durch seine effektive Vorreinigung schützt der Vorfilter die empfindlichen nachfolgenden Filter und sorgt für eine längere Lebensdauer des gesamten Systems.

Schutz der Hauptfilter und Verlängerung der Lebensdauer

Der Vorfilter schützt die nachfolgenden Filterstufen, insbesondere die Umkehrosmosemembran, vor einer schnellen Verschmutzung und Verstopfung. Durch das Abfangen größerer Partikel wird die Belastung der nachfolgenden Filter erheblich reduziert. Das Resultat ist eine verlängerte Lebensdauer der Hauptfilter, was die Effizienz und Wirtschaftlichkeit des Wasseraufbereitungssystems erhöht und langfristig Kosten für Ersatzteile und Wartung spart.

Verbesserte Filtrationseffizienz

Ein sauberer Vorfilter verbessert die gesamte Filtrationsleistung des Wasserfiltersystems. Durch das Entfernen von groben Verunreinigungen wird die nachfolgende Filtration effizienter und gründlicher. Der Vorfilter trägt so dazu bei, dass Schadstoffe und Partikel, die schädlich sein könnten, in den weiteren Filterschritten noch gründlicher entfernt werden. Dies erhöht die Wasserqualität und sorgt dafür, dass nur besonders reines Wasser die letzte Stufe des Systems erreicht.

Einfache Wartung und Austausch

Vorfilter sind oft leicht zugänglich und einfach auszutauschen, was die Wartung der Anlage vereinfacht. Abhängig von der Wasserqualität und der Nutzung des Systems empfiehlt es sich, den Vorfilter alle sechs bis zwölf Monate zu wechseln. Ein regelmäßiger Austausch des Vorfilters sorgt nicht nur für eine hohe Wasserqualität, sondern verhindert auch, dass der Filter seine Wirksamkeit verliert und nachfolgende Filterstufen unnötig belastet werden. Ein gut gewarteter Vorfilter trägt entscheidend zur Leistungsfähigkeit der gesamten Anlage bei.

Verbesserung des Geschmacks und Geruchs von Wasser

Durch das Herausfiltern von Schwebstoffen und Ablagerungen trägt der Vorfilter auch zur geschmacklichen und geruchlichen Qualität des Trinkwassers bei. Das Wasser wirkt dadurch frischer und klarer, ohne den Einfluss unerwünschter Partikel, die den Geschmack und Geruch negativ beeinflussen könnten. Besonders für Trinkwasser und die Zubereitung von Speisen und Getränken ist dies von großer Bedeutung, da die sensorische Qualität des Wassers deutlich gesteigert wird.

Optimale Vorbereitung für die Hauptfiltration

Der Vorfilter bereitet das Wasser optimal für die weiteren Filterschritte vor, indem er eine erste Barriere für Verunreinigungen darstellt. Dies ermöglicht den nachfolgenden Filtern, sich auf die Entfernung feinster Schadstoffe und Mikroorganismen zu konzentrieren, was die Gesamtleistung und Zuverlässigkeit des Wasserfiltersystems deutlich erhöht.

Ein hochwertiger Vorfilter ist daher ein wichtiger Faktor, um die Langlebigkeit und Effizienz des gesamten Wasseraufbereitungssystems sicherzustellen und konstant reines, hochwertiges Trinkwasser zu liefern.

Fazit:
Der Vorfilter spielt eine zentrale Rolle in der Wasseraufbereitung und trägt maßgeblich zur Effizienz, Langlebigkeit und Wasserqualität des gesamten Systems bei. Durch regelmäßige Wartung und Austausch stellt er sicher, dass die nachfolgenden Filter optimal arbeiten können, während Geschmack, Geruch und Reinheit des Wassers verbessert werden.