With 3/4" internal thread and EPDM flat seal - e.g. screw-on to taps or washing machine connection - 1/4 inch hose/spigot plug connection - For water, liquids, drinks and compressed air - Material POM and EPDM seal - Temperature range 1°C to 98°C - DVGW W270, KTW, WRAS, NSF and ACS

Field of application: for cold water filtration up to 25°C Ideal for use as a reverse osmosis pre-filter or post-filter. Efficiently reduces chlorine, organic substances (VOCs) and certain pesticides. Reduction of chlorine taste and odour Properties: Optimum utilisation of the filter material thanks to the high porosity of the carbon. This prevents the cartridge from clogging before its absorption capacity is exhausted and ensures a low pressure drop. and a low pressure drop is guaranteed. Material: precise combination of mixed granular activated carbon media (GAC) for high adsorption capacity mixed mild media of activated coconut, bituminous carbon and other advanced mixed filter media for effective water treatment.

The stopcocks are used as manual valves to temporarily switch off the water flow manually. Downstream assemblies or systems can be switched off for maintenance purposes. Water treatment systems such as osmosis systems or water filters can be switched on and off using the stopcocks. The manual valves are made of the highest quality materials and have all the necessary approvals for use with drinking water (DVGW W270, KTW, WRAS, NSF and ACS). The valves can also be used for compressed air or other liquids (subject to prior technical clarification). Shut-off valves for metric and imperial plug connections are available in various designs. The materials used for the manual valves are - Housing and handle made of POM - Seals made of EPDM - Retaining teeth made of stainless steel STS301 The valves may only be used in either the "fully open" or "fully closed" setting. The stopcocks must not be used for flow control, as a permanent pipe seal (the use of end caps is recommended for this) or as an outlet or water tap.