Product information "SlimLine Low Pressure Membrane 150GPD"

Suitable for

SmartLine Osmosis 150 GPD
ProfiLine Osmosis 450 GPD

Place of use:

Membrane housing 2.5 inch

Technical data:

Length: approx. 26cm
Diameter: approx. 4.5 cm
Working pressure: 2.7-6 bar
Retention: 98.5%
Material: Filmtec
Variant: Slimline
High efficiency thanks to patented membrane flat film technology
Reliable filter performance with long service life
Membrane type: Polyamide thin-film composite membrane
NSF certification
Immediate high retention rate at start and after stabilisation
Salt retention rate: stabilised 98.5%
pH value: continuous operation 2-11
Temperature range: min. 2°C, max. 30°C
Chlorine tolerance: 0.1 mg/litre free chlorine
Dry despatch for easy handling and long shelf life

Recommended membrane change: every 36 months
depending on the water load and the amount of water filtered.

Accessory Items

Screw-in connector 1/8 inch - 1/4 inch connector

Screw-in connector 1/4 inch - 1/8 inch external threadFor water, liquids, beverages and compressed air Material POM and EPDM seal Temperature range 1°C to 98°C NSF and ACS certification, food approval, W270 KTW

€1.90*

Details

Membrane housing 2.5 inch

Application: for equipping with osmosis membrane 50 to 200 GPD for equipping with ultrafiltration membrane Place of use: SmartLine osmosis/ultrafiltration ProfiLine osmosis/ultrafiltration and also for all commercially available osmosis systems in membrane sizes 50 - 200 GPD material: Reinforced PP 2 sealing rings, NBR material for maximum tightness Technical data: Size: 2.5 inch / 55x315mm Connection thread: 3 x 1/8 inch Housing spanner: 2.5 inch housing spanner Working pressure: max. 6 bar Note: Approval for use with drinking water Manufactured in the EU from high-quality materials

€16.10*

Diaphragm case spanner 2.5 inch

Special spanner for screwing down 2.5 inch YT-25W diaphragm housings For secure opening and tight closing of the housing Made of white polypropylene with high strength Accurate fit for other diaphragm housings is not guaranteed

€2.10*

Similar Items

SlimLine Low Pressure Membrane 110GPD

Suitable for ProfiLine osmosis 220/330 GPD Place of use: Membrane housing 2.5 inch Technical Data: Length: approx. 26cm Diameter: approx. 4.5 cm Working pressure: 2.7-6 bar Retention: 98.5% Material: Filmtec Variant: Slimline High efficiency thanks to patented membrane flat film technology Reliable filter performance with a long service life Membrane type: Polyamide thin-film composite membrane NSF certification Immediate high retention rate at start and after stabilisation Salt retention rate: stabilised 98.5% pH value: continuous operation 2-11 Temperature range: min. 2°C, max. 30°C Chlorine tolerance: 0.1 mg/litre free chlorine Dry despatch for easy handling and long shelf life Recommended membrane change: every 36 monthsdepending on the water load and the amount of water filtered.

From €41.20*

Details