Pre-filter set for ProfiLine 450 / 600 GPD Stage 1: Sediment filter 1 micron Area of application: Sediment removal of sand, silt, rust and suspended matter (suspended solids) from drinking water. Properties: Ensures exceptional dirt holding capacity and low pressure losses Material: 100% pure polypropylene, without additives Filter material is therefore surfactant-free and contains no resin binders, lubricants, antistatic agents, release agents or other chemical additives. Stage 2: Activated carbon filter Area of application: Filtering particles from tap water Reduction of chlorine and other impurities such as organic compounds (VOCs) and dirt from tap water Reduces undesirable tastes and odours Material: Mixture of mixed activated carbon and special media Stage 2: Activated carbon filter Area of application: Removes larger impurities from drinking water Removes water impurities such as chlorine, total organic carbon (TOC), pharmaceuticals, turbidity, volatile organic chemicals (VOC), herbicides, industrial solvents, insecticides, pesticides and chemicals, bad taste and odours Properties The filter is vacuum sealed and complete with a polypropylene sleeve, a thermally bonded cap and an industrially sealed silicone ring to ensure longevity and reliability. Material high quality coconut charcoal for maximum chemical adsorption granular activated carbon medium Stage 3: Carbon block filter Area of application: Ideal for use as a reverse osmosis pre-filter or post-filter Water softening, iron reduction Significant reduction of chlorine and organic compounds (VOCs), which improves the taste and odour of drinking water Protection against bacteria and viruses thanks to nanosilver Properties: The high porosity of the carbon prevents the cartridge from clogging before its absorption capacity is exhausted, maximising the use of the carbon, while maintaining a low pressure drop. Granulated GAC activated carbon media for better reduction of chlorine taste and odour, as well as high adsorption capacity. Equipped with nanosilver BACINIXTM for protection against bacteria and viruses. Material: Mixed granular activated carbon media Mixed media activated coconut, bituminous carbon and other advanced mixed filter media for particularly effective water treatment, with antimicrobial/antibacterial nanosilver technology - BACINIX.

0.5 litres are required for the 2.5 inch secondary filter Area of application: Suitable for fresh and salt water Properties: special carbon granulate for high demands. Removes toxins, phenols and medicines. absorbs turbidity and ensures crystal clear water. purified and dust-free