Skip to main content Skip to search Skip to main navigation
Shipping Europe-wide
01525 380 4386 | 0212-8813924-0
Mon-Fri: 09:00 - 17:00
Free shipping from 69€ Germany-wide
product.name

Product information "PressureLine 400/600 GPD"

Our Large Powerful, for high and fast water requirements, can be flexibly configured,
for special problems and requirements.


PressureLine - perfection and purity with every drop

Our PressureLine osmosis system is more than just a filter system - it is an investment in your health, your family and our environment,
for quality of life and the careful use of resources.

Our PressureLine sets new standards in water filtration and offers you a powerful, high-quality combination
of efficiency, reliability and sustainability for your household or office,
even with problematic tap water.
Each component has been carefully designed to ensure long-lasting and consistent efficiency.

Advanced six-stage high performance filtration system

The PressureLine offers precise and powerful filtration performance to meet even the most demanding requirements:

  • Three high-quality pre-filters: two sediment filters and a high-performance carbon block filter
    remove coarse impurities such as sediment, rust and chlorine,
    protect the system and increase the service life of the membranes.
  • Main filtration: One high-performance low-pressure membrane each in the 400 and 600 GPD versions,
    eliminates pollutants with a precision of 0.0001 microns and a reliability of 99%, such as chemical impurities,
    drug residues, microplastics, heavy metals and organic compounds and impurities, from a water pressure of 2.75 bar.
  • Post-filter: Two activated carbon filters serve as an additional safety level to eliminate any residual substances.

Special technical features for more convenience

High-quality brushless booster pump - powerful and durable

  • Continuous operation for up to 12 hours without loss of power - ideal for intensive use.
  • Robust and reliable: Highly resilient and corrosion-resistant.
  • High efficiency: High efficiency with low energy consumption and low heat generation.
  • Constant pressure: Precise pressure control even with fluctuating water pressure, for optimum performance.
    An integrated regulator ensures optimum pressure adjustment and monitoring of the system.
  • Durability: Virtually wear-free thanks to brushless motor technology.
  • Safe and compact: Integrated overheating protection and space-saving design.
  • Quiet operation: Low noise level, making it pleasant to use.

Smart Control Unit - patented control unit

With the Smart Control Unit, the PressureLine offers precision and convenience:

  • Our patented control unit for our PressureLine.
  • It controls the operation of the brushless booster pump, for constant pressure, energy efficiency and quiet operation.
  • Monitors the water supply to the system
  • and checks the status of the outlet pipe to precisely adjust the water flow.

Simple commissioning and safe operation

The PressureLine osmosis systems can be installed and operated without prior knowledge:

  • Colour-coded connections enable quick and error-free installation.
  • Manually adjustable waste water ratio: Optimise water consumption to up to 1:0.8 litres
    a particularly effective, resource-saving solution.
  • Flexible connection: Connection is possible both to the angle valve under the sink and to the tap.

Easy care and precise control

Maintenance of the PressureLine is uncomplicated:

  • Flush valve for effective cleaning of your system, to extend the service life of the membrane, and for consistently high filter performance.
    The flush valve is manual,
    to ensure thorough cleaning, unlike automatic flush valves, whose flushing time is too short.
  • Visual inspection: Bluish transparent filter housings allow a quick check of the degree of filter clogging.
  • Integrated conductivity meter: measures the water quality and acts as an indicator for filter replacement.

Certified safety and maximum reliability

Your safety comes first:

  • Tested standards: Certified to NSF, WRAS and DVGW W 270 for maximum drinking water compliance.
  • Robust housing: UV-resistant and durable - ideal for daily use.
  • Double O-ring seals ensure maximum tightness and safety.

Sustainability

With the PressureLine, you are not only relying on quality, but also on an environmentally conscious system:

  • Low waste water ratio: reduces water consumption and conserves resources.
  • Longevity: We give our products a long life
    through the use of high-quality materials and the ability to replace wearing parts.
  • Replacement intervals: Long service life thanks to high-quality filters.
  • Filter change without housing replacement: Reduces waste and costs.
  • Recyclable materials: Up to 98 % of the components can be recycled.

Flexibility for special demands and individual requirements

The filtration can be customised to the specific problems of your source water.

  • Pre-filter: Depending on the quality of your source water, the use of special pre-filters is recommended.
    Iron reduction filter: if the iron content in the water is too high, this protects the membrane and increases the service life.
    Softening filter: for high water hardness, protects the membrane and increases the service life.
  • Post-filter: Optionally, two further post-filters can be integrated behind the osmosis membrane,
    to counteract particular problems with the source water.
    These secondary filters are particularly effective at removing silicates, nitrites/nitrates and glyphosates,
    which cannot be completely removed by any osmosis membrane due to their small size and electrical charge.
  • We will be happy to advise you.


The best for your health and our nature

Our aim is not simply to offer you an osmosis system, but the best solution for your drinking water needs,
with a system that benefits your family, your employees and the environment.
Your satisfaction is important to us. Your vitality and health is our pleasure.
Even after your purchase, we are happy to assist you with expert advice and reliable service.

Flow rate: 68-72 litres/hour Osmosis, 95-110 litres/hour Osmosis
Free shipping: within Germany
PressureLine 400 and 600 GPD: PressureLine 400GPD 64 litres/hour, PressureLine 600GPD 95 litres/hour
With booster pump: Yes

Technical data

LDW pump capacity: 12 hours operation/30 minutes break
Membrane capacity: 400 GPD / maximum 1520 litres/day
Ultrapure water quality: Retention rate 98.5%
Waste water ratio:
Ratio 1 : 0.7 at max. 10 dGH
Ratio 1 : 0.9 from 10 dGH
Dimensions: H: 41.5cm W: 46cm D: 30cm

Application range

Line pressure:
Minimum from 2 bar
Maximum up to 6 bar

Water temperature:
Minimum from 5ºC
Optimum at 25º
Maximum up to 25ºC

Water hardness:
Minimum from 0 dGH
Optimal at 5 dGH
Maximum up to 29 dGH

The ultrapure water quantity of osmosis systems is basically dependent on the above three main parameters.
Low line pressure, low water temperature or high water hardness reduce the flow rate and thus reduce the amount of ultrapure water produced.
Based on our experience, the maximum filter performance, due to not always optimal household conditions, is:
PressureLine 400GPD 64 litres of ultrapure water/hour. Within the above areas of application, our systems provide consistently high ultrapure water quality.

Replacement intervals

Pre-filter: 6 - 9 months on average
Membrane: 2-3 years on average
depending on the water load and the amount of water filtered

Technical data

LDW pump capacity: 12 hours operation/30 minutes break
Membrane capacity: 600 GPD / maximum 2280 litres/day
Ultrapure water quality: Retention rate 98.5%
Waste water ratio:
Ratio 1 : 0.7 at max. 10 dGH
Ratio 1 : 0.9 from 10 dGH
Dimensions: H: 41.5cm W: 46cm D: 30cm

Application range

Line pressure:
Minimum from 2 bar
Maximum up to 6 bar

Water temperature:
Minimum from 5ºC
Optimum at 25º
Maximum up to 25ºC

Water hardness:
Minimum from 0 dGH
Optimal at 5 dGH
Maximum up to 29 dGH

The ultrapure water quantity of osmosis systems is basically dependent on the above three main parameters.
Low line pressure, low water temperature or high water hardness reduce the flow rate and thus reduce the amount of ultrapure water produced.
Based on our experience, the maximum filter performance, due to not always optimal household conditions, is:
PressureLine 600GPD 95 litres of ultrapure water/hour. Within the above areas of application, our systems provide consistently high ultrapure water quality.

Replacement intervals

Pre-filter: 6 - 9 months on average
Membrane: 2-3 years on average
depending on the water load and the amount of water filtered

Scope of delivery 400GPD

  • System completely mounted in aluminium frame
  • Booster pump (brushless) incl. transformer
  • Smart Control Unit
  • 3 pre-filters: 5mµ sediment / carbon block / 1mµ sediment
  • 400GPD membrane
  • 2 post-filters: activated carbon (size 2.5 x 12 inches)
  • 3 hoses (1 metre each) in 3/8 inch blue, 1/4 inch white and red
  • 3/8 inch angle valve connection for the water supply
  • Siphon connection for draining the waste water
  • Membrane housing spanner 3 inch
  • Pre-filter housing spanner 10 inch
  • Dummy plugs for storing the system in blue, white (transparent) and red

Scope of delivery 600GPD

  • System completely mounted in aluminium frame
  • Booster pump (brushless) incl. transformer
  • Smart Control Unit
  • 3 pre-filters: 5mµ sediment / carbon block / 1mµ sediment
  • 600GPD membrane
  • 2 post-filters: activated carbon (size 2.5 x 12 inches)
  • 3 hoses (1 metre each) in 3/8 inch blue, 1/4 inch white and red
  • 3/8 inch angle valve connection for the water supply
  • Siphon connection for draining the waste water
  • Membrane housing spanner 3 inch
  • Pre-filter housing spanner 10 inch
  • Dummy plugs for storing the system in blue, white (transparent) and red

Pre-filter set for reordering:

PrefilterSet for PressureLine

Pre-filter for special requirements:

- Water softening filter

- Iron reduction filter

Post-filter to improve the quality of your water:

- Silicate filter

- Nitrite/nitrate filter

- Activated carbon filter

- Anti-glyphosate filter

Refill packs for all secondary filters:

Refill packs 0.5 litres, suitable for one filter unit

Accessories

Accessories

PressureLine pre-filter set
Pre-filter set for PressureLine 400/600GPD Stage 1+2: Sediment filter 5 micron + 1 micron Area of application: Sediment removal of sand, silt, rust and suspended solids (suspended solids) from drinking water. Properties: Ensures exceptional dirt holding capacity and low pressure losses Material: 100% pure polypropylene, without additives Filter material is therefore surfactant-free and contains no resin binders, lubricants, antistatic agents, release agents or other chemical additives. Stage 3: Carbon block filter Area of application: Reduces the concentration of chlorine and organic compounds (VOCs) in tap water Counteracts bad taste and odour Properties: The very high porosity of the carbon prevents the cartridge from clogging before its absorption capacity is exhausted, maximising the use of the carbon, while maintaining a low pressure drop. Improvement of drinking water quality through maximum utilisation of the carbon Material: precise combination of mixed granular carbon block blended mild media of activated coconut, bituminous carbon and other advanced mixed filter media for highly effective water treatment.

€31.00*
Carbon granulate refill pack
0.5 litres are required for the 2.5 inch secondary filter Area of application: Suitable for fresh and salt water Properties: special carbon granulate for high demands. Removes toxins, phenols and medicines. absorbs turbidity and ensures crystal clear water. purified and dust-free

€12.80*
Membrane 600 GPD
Suitable for PressureLine Osmosis 600 GPD Place of use: Membrane housing 3 inch Technical data: 2280 litres per day Length: approx. 295 mm (3012) Diameter: approx. 76.5 mm Working pressure: 2.7-10 bar Retention: 98.5% Material: polyamide High efficiency thanks to patented membrane flat film technology Reliable filter performance with a long service life Membrane type: Polyamide thin-layer composite membrane NSF certification Immediate high retention rate at start and after stabilisation Salt retention rate: stabilised 98.5% pH value: continuous operation 2-10 Temperature range: min. 2°C, max. 30°C Chlorine tolerance: 0.1 mg/litre free chlorine Dry shipping for easy handling and long shelf life Recommended membrane change: every 36 monthsdepending on the water load and the amount of water filtered.

€108.60*
Membrane 400 GPD
Suitable for PressureLine Osmose 400 GPD Place of use: Membrane housing 3 inch Technical data: 1520 litres per day Length: approx. 295 mm (3012) Diameter: approx. 70 mm Working pressure: 2.7-10 bar Retention: 98.5% Material: polyamide High efficiency thanks to patented membrane flat film technology Reliable filter performance with a long service life Membrane type: Polyamide thin-layer composite membrane NSF certification Immediate high retention rate at start and after stabilisation Salt retention rate: stabilised 98.5% pH value: continuous operation 2-10 Temperature range: min. 2°C, max. 30°C Chlorine tolerance: 0.1 mg/litre free chlorine Dry shipping for easy handling and long shelf life Recommended membrane change: Every 36 monthsdepending on the water load and the amount of water filtered.

€86.30*
Request callback
Die von Ihnen übermittelten Informationen werden gemäß unserer Datenschutzerklärung ausschließlich für die Abwicklung Ihrer Kontaktanfrage gespeichert.
Callback successfully requested
Form could not be sent