Product information "SmartLine osmosis system 100/150/200 GPD + carbon filter"
Our small powerful one for low water consumption.
With additional activated carbon filter to eliminate any residual substances.
SmartLine 100/150/200 GPD - simple, efficient and sustainable water filtration
Water is more than just a basic need - it is quality of life.
Our aim is not simply to offer you an osmosis system, but the best solution for your drinking water needs.
Our SmartLine combines classic design, innovative technology and maximum sustainability in one system.
It offers you a premium combination of quality, efficiency, reliability and durability for your household or office,
even with problematic source water.
Effective filtration in three stages - for water in its purest form
The SmartLine osmosis system offers precise and reliable ultra-fine filtration for low water consumption.
- Pre-filter: Two high-quality filters: sediment and carbon block filters remove coarse particles such as sand, rust and chlorine.
This preliminary stage protects the membrane and extends its service life. - Main filtration: High-performance low-pressure membranes in 100/150/200 GPD variants eliminate particles with a precision of
of 0.0001 microns and a 99% reliability rate to eliminate contaminants such as chemical impurities, drug residues
microplastics, heavy metals and organic compounds and impurities, from a water pressure of 2.75 bar. - Post-filter: Choose your SmartLine with a carbon filter.
This filter serves as an additional filter stage to eliminate any residual substances.
Easy commissioning and safe operation
The SmartLine combines innovative technology with user-friendly operation.
- Colour-coded connections enable quick and error-free installation.
- Manually adjustable waste water ratio: Optimise water consumption down to 1:0.8 litres - a particularly effective solution that conserves resources,
resource-saving solution. - Changeover valve: Enables flexible selection between tap water and the water supply to the osmosis system.
Easy maintenance and precise control
Maintenance of the SmartLine is uncomplicated and time-saving.
- Flush valve for effective cleaning of your system, to extend the service life of the membrane and for consistently high filter performance.
- The flush valve is manual to ensure thorough cleaning, unlike automatic flush valves, whose flushing time is too short.
- Visual inspection: Transparent pre-filter housings allow visual inspection of the filter status.
- Conductivity meter: Measures water quality and acts as an indicator for filter replacement.
Certified safety and maximum reliability
Your safety is our top priority.
- Tested standards: Certified to NSF, WRAS and DVGW W 270 for maximum drinking water compliance.
- Robust housing: UV-resistant and durable - ideal for daily use.
- Double O-ring seals ensure maximum tightness and safety.
Sustainability that impresses
The SmartLine osmosis system not only stands for quality, but also for responsibility.
It is durable, resource-saving and environmentally friendly.
- Low waste water ratio: Reduces water consumption and conserves resources.
- Durability: We give our products a long life through the use of high-quality materials
and the ability to replace wearing parts. - Replacement intervals: Long service life thanks to high-quality filters.
- Filter change without housing replacement: Reduces waste and costs.
- Recyclable materials: Up to 98 % of components can be recycled.
Flexibility for special challenges
The SmartLine can be perfectly adapted to the specific problems of your source water.
- Post-filter options: Up to four secondary filters can be added downstream of the osmosis membrane,
to counteract specific problems with your source water.
These post-filters are particularly effective at removing silicates, nitrate/nitrite and glyphosates,
which cannot be completely retained by any osmosis membrane due to their small size and electrical charge.
Reliable support
Your satisfaction is important to us.
Your vitality and health is our pleasure.
Even after your purchase, we are happy to provide you with expert advice and reliable service.
| Flow rate: | 10-11 litres/hour Osmosis, 14-15 litres/hour Osmosis, 19-21 litres/hour Osmosis |
|---|---|
| Free shipping: | within Germany |
| SmartLine osmosis system 100/150/200 GPD + carbon filter: | SmartLine 100GPD + carbon filter, SmartLine 150GPD + carbon filter, SmartLine 200GPD + carbon filter |
| Waste water ratio: | 1 : 0,8 (1) |
Technical data
Membrane capacity: 100 GPD / maximum 380 litres/day
Membrane capacity: 150 GPD / maximum 570 litres/day
Membrane capacity: 200 GPD / maximum 760 litres/day
Ultrapure water quality: Retention rate 98.5%
Waste water ratio:
Ratio 1 : 0.8 at max. 15 dGH
Ratio 1:1 from 15 dGH
Dimensions: H: 32cm W: 24.5cm D: 12cm
Application range
Line pressure:
Minimum from 2.75 bar
Optimum at 4.5 bar
Maximum up to 6 bar
Water temperature:
Minimum from 5ºC
Optimum at 25ºC
Maximum up to 25ºC
Water hardness:
Minimum from 0 dGH
Optimal at 5 dGH
Maximum up to 29 dGH
The ultrapure water quantity of an osmosis system is basically dependent on the above three main parameters.
Low line pressure, low water temperature or high water hardness reduce the flow rate
and thus reduce the amount of ultrapure water produced.
In our experience, the average filter performance, due to not always optimal household conditions, is
SmartLine 100: 10 - 11 litres of ultrapure water / hour
SmartLine 150: 14 - 15 litres of ultrapure water / hour
SmartLine 200: 19 - 21 litres of ultrapure water / hour
Within the above application ranges, our systems provide a consistently high ultrapure water quality.
Replacement intervals
Pre-filter:
6 - 14 months on average
Membrane:
2 - 3 years on average
depending on the water load and the amount of water filtered.
Technical Data
Membrane capacity: 150 GPD / maximum 570 litres/day
Ultrapure water quality: Retention rate 98.5%
Waste water ratio:
Ratio 1 : 0.8 at max. 15 dGH
Ratio 1:1 from 15 dGH
Dimensions: H: 32cm W: 24.5cm D: 12cm
Application range
Line pressure:
Minimum from 2.75 bar
Optimum at 4.5 bar
Maximum up to 6 bar
Water temperature:
Minimum from 5ºC
Optimum at 25ºC
Maximum up to 25ºC
Water hardness:
Minimum from 0 dGH
Optimal at 5 dGH
Maximum up to 29 dGH
The ultrapure water quantity of an osmosis system is basically dependent on the above three main parameters.
Low line pressure, low water temperature or high water hardness reduce the flow rate
and thus reduce the amount of ultrapure water produced.
Based on our experience, the average filter performance, due to not always optimal household conditions, is
SmartLine 150: 14-15 litres of ultrapure water per hour
Within the above areas of application, our systems provide consistently high ultrapure water quality.
Replacement intervals
Pre-filter:
6 - 14 months on average
Membrane:
2 - 3 years on average
depending on the water load and the amount of water filtered.
Technical data
Membrane capacity: 200 GPD / maximum 760 litres/day
Ultra-pure water quality: retention rate 98.5%
Waste water ratio:
Ratio 1 : 0.8 at max. 15 dGH
Ratio 1:1 from 15 dGH
Dimensions: H: 32cm W: 24.5cm D: 12cm
Area of application
Line pressure:
Minimum from 2.75 bar
Optimum at 4.5 bar
Maximum up to 6 bar
Water temperature:
Minimum from 5ºC
Optimum at 25ºC
Maximum up to 25ºC
Water hardness:
Minimum from 0 dGH
Optimum at 5 dGH
Maximum up to 29 dGH
The ultrapure water quantity of the osmosis system is basically dependent on the above three main parameters.
Low line pressure, low water temperature or high water hardness reduce the flow rate
and thus reduce the amount of ultrapure water produced.
In our experience, the average filter performance, due to not always optimal household conditions, is
SmartLine 200: 19-21 litres of ultrapure water per hour
Within the above areas of application, our systems provide consistently high ultrapure water quality.
Replacement intervals
Pre-filter:
6 - 14 months on average
Membrane:
2 - 3 years on average
depending on the water load and the amount of water filtered.
Scope of delivery
- System as illustrated
- 1 membrane
- 3 1/4 inch hoses (1 metre each) in blue, white and red
- Changeover valve with aerator incl. adapter AG 24x1 to AG22x1 for connection to tap
- 2 wall brackets incl. screws
- 3 blanking plugs for mounting the system in blue, white and red
- Membrane housing spanner 2.5" inch
- 1 carbon filter incl. connection material
- Aluminium frame, if selected
Pre-filter set for reordering:
Post-filter to improve the quality of your water:
Refill packs for all secondary filters: