SmartLine osmosis system 100/150/200 GPD
- Spürbar reines Wasser: Entfernt bis zu 99 % Schadstoffe wie Chlor, Schwermetalle und Medikamentenrückstände
- Extrem effizient: Mit einem Abwasserverhältnis bis 1:0,8 sparen Sie Wasser und Kosten
- Flexible High-Performance Membran: 100–200 GPD – anpassbar an jeden Bedarf
€114.50
Price incl. VAT, plus Shipping costs
Available immediately
Delivery time: 1-3 days
Product information "SmartLine osmosis system 100/150/200 GPD "
Our Kleine Kräftige for low water requirements can be flexibly configured,
for special problems and specific requirements
SmartLine 100/150/200 GPD - simple, efficient and sustainable water filtration
Water is more than just a basic need - it is quality of life.
Our aim is not simply to offer you an osmosis system, but the best solution for your drinking water needs.
Our SmartLine combines classic design, innovative technology and maximum sustainability in one system.
It offers you a premium combination of quality, efficiency, reliability and durability for your household or office,
even with problematic source water.
Effective filtration in three stages - for water in its purest form
The SmartLine osmosis system offers precise and reliable ultra-fine filtration for low water consumption.
- Pre-filter: Two high-quality filters: sediment and carbon block filters remove coarse particles such as sand, rust and chlorine.
This preliminary stage protects the membrane and extends its service life. - Main filtration: High-performance low-pressure membranes in 100/150/200 GPD variants eliminate particles with a precision of
of 0.0001 microns and a 99% reliability rate to eliminate contaminants such as chemical impurities, drug residues
microplastics, heavy metals and organic compounds and impurities, from a water pressure of 2.75 bar. - Post-filter - Optional, for customising the filtration. For special or particularly severe problems,
and for specific requirements, additional secondary filters can be integrated for optimum water quality in special cases.
Simple commissioning and safe operation
The SmartLine combines innovative technology with user-friendly operation.
- Colour-coded connections enable quick and error-free installation.
- Manually adjustable waste water ratio: Optimise water consumption down to 1:0.8 litres - a particularly effective solution that conserves resources,
resource-saving solution. - Changeover valve: Enables flexible selection between tap water and the water supply to the osmosis system.
Easy maintenance and precise control
Maintenance of the SmartLine is uncomplicated and time-saving.
- Flush valve for effective cleaning of your system, to extend the service life of the membrane and for consistently high filter performance.
- The flush valve is manual to ensure thorough cleaning, unlike automatic flush valves, whose flushing time is too short.
- Visual inspection: Transparent pre-filter housing allows visual inspection of the filter status.
- Conductivity meter: Measures water quality and acts as an indicator for filter replacement.
Certified safety and maximum reliability
Your safety is our top priority.
- Tested standards: Certified to NSF, WRAS and DVGW W 270 for maximum drinking water compliance.
- Robust housing: UV-resistant and durable - ideal for daily use.
- Double O-ring seals ensure maximum tightness and safety.
Sustainability that impresses
The SmartLine osmosis system not only stands for quality, but also for responsibility.
It is durable, resource-saving and environmentally friendly.
- Low waste water ratio: Reduces water consumption and conserves resources.
- Durability: We give our products a long life through the use of high-quality materials
and the ability to replace wearing parts. - Replacement intervals: Long service life thanks to high-quality filters.
- Filter change without housing replacement: Reduces waste and costs.
- Recyclable materials: Up to 98 % of components can be recycled.
Flexibility for special challenges
The SmartLine can be perfectly adapted to the specific problems of your source water.
- Post-filter options: Up to four secondary filters can be added downstream of the osmosis membrane,
to counteract specific problems with your source water.
These post-filters are particularly effective at removing silicates, nitrate/nitrite and glyphosates,
which cannot be completely retained by any osmosis membrane due to their small size and electrical charge.
Reliable support
Your satisfaction is important to us.
Your vitality and health is our pleasure.
Even after your purchase, we are happy to provide you with expert advice and reliable service.
Properties
- Flow rate
- 10-11 litres/hour Osmosis, 14-15 litres/hour Osmosis, 19-21 litres/hour Osmosis
- SmartLine 100/150/200 GPD
- 100 GPD 10-11 litres/hour, 150 GPD 14-15 litres/hour, 200 GPD 19-21 litres/hour
- Waste water ratio
- 1 : 0,8 (1)
Technical data
Membrane capacity: 100 GPD / maximum 380 litres/day
Membrane capacity: 150 GPD / maximum 570 litres/day
Membrane capacity: 200 GPD / maximum 760 litres/day
Ultrapure water quality: Retention rate 98.5%
Waste water ratio:
Ratio 1 : 0.8 at max. 15 dGH
Ratio 1:1 from 15 dGH
Dimensions: H: 32cm W: 24.5cm D: 12cm
Application range
Line pressure:
Minimum from 2.75 bar
Optimum at 4.5 bar
Maximum up to 6 bar
Water temperature:
Minimum from 5ºC
Optimum at 25ºC
Maximum up to 25ºC
Water hardness:
Minimum from 0 dGH
Optimal at 5 dGH
Maximum up to 29 dGH
The ultrapure water quantity of an osmosis system is basically dependent on the above three main parameters.
Low line pressure, low water temperature or high water hardness reduce the flow rate
and thus reduce the amount of ultrapure water produced.
In our experience, the average filter performance, due to not always optimal household conditions, is
SmartLine 100: 10 - 11 litres of ultrapure water / hour
SmartLine 150: 14 - 15 litres of ultrapure water / hour
SmartLine 200: 19 - 21 litres of ultrapure water / hour
Within the above application ranges, our systems provide a consistently high ultrapure water quality.
Replacement intervals
Pre-filter:
6 - 14 months on average
Membrane:
2 - 3 years on average
depending on the water load and the amount of water filtered.
Technical Data
Membrane capacity: 150 GPD / maximum 570 litres/day
Ultrapure water quality: Retention rate 98.5%
Waste water ratio:
Ratio 1 : 0.8 at max. 15 dGH
Ratio 1:1 from 15 dGH
Dimensions: H: 32cm W: 24.5cm D: 12cm
Application range
Line pressure:
Minimum from 2.75 bar
Optimum at 4.5 bar
Maximum up to 6 bar
Water temperature:
Minimum from 5ºC
Optimum at 25ºC
Maximum up to 25ºC
Water hardness:
Minimum from 0 dGH
Optimal at 5 dGH
Maximum up to 29 dGH
The ultrapure water quantity of an osmosis system is basically dependent on the above three main parameters.
Low line pressure, low water temperature or high water hardness reduce the flow rate
and thus reduce the amount of ultrapure water produced.
Based on our experience, the average filter performance, due to not always optimal household conditions, is
SmartLine 150: 14-15 litres of ultrapure water per hour
Within the above areas of application, our systems provide consistently high ultrapure water quality.
Replacement intervals
Pre-filter:
6 - 14 months on average
Membrane:
2 - 3 years on average
depending on the water load and the amount of water filtered.
Technical data
Membrane capacity: 200 GPD / maximum 760 litres/day
Ultra-pure water quality: retention rate 98.5%
Waste water ratio:
Ratio 1 : 0.8 at max. 15 dGH
Ratio 1:1 from 15 dGH
Dimensions: H: 32cm W: 24.5cm D: 12cm
Area of application
Line pressure:
Minimum from 2.75 bar
Optimum at 4.5 bar
Maximum up to 6 bar
Water temperature:
Minimum from 5ºC
Optimum at 25ºC
Maximum up to 25ºC
Water hardness:
Minimum from 0 dGH
Optimum at 5 dGH
Maximum up to 29 dGH
The ultrapure water quantity of the osmosis system is basically dependent on the above three main parameters.
Low line pressure, low water temperature or high water hardness reduce the flow rate
and thus reduce the amount of ultrapure water produced.
In our experience, the average filter performance, due to not always optimal household conditions, is
SmartLine 200: 19-21 litres of ultrapure water per hour
Within the above areas of application, our systems provide consistently high ultrapure water quality.
Replacement intervals
Pre-filter:
6 - 14 months on average
Membrane:
2 - 3 years on average
depending on the water load and the amount of water filtered.
Scope of delivery
- System as illustrated
- 1 membrane
- 3 1/4 inch hoses (1 metre each) in blue, white and red
- Changeover valve with aerator incl. adapter AG 24x1 to AG22x1 for connection to tap
- 2 wall brackets incl. screws
- 3 blanking plugs for mounting the system in blue, white and red
- Membrane housing spanner 2.5" inch
- Silicate, nitrate/nitrite filter, anti-glyphosate filter, if selected
- Aluminium frame, if selected
Pre-filter set for reordering:
Post-filter to improve the quality of your water:
Refill packs for all secondary filters:
Accessories
Range of application: suitable for fresh and salt water Properties: special carbon granulate for high demands. Removes toxins, phenols and medicines. absorbs turbidity and ensures crystal clear water. Purified and dust-free Scope of delivery: 2 x double C-clamps 2 x elbow fittings with thread Angle fitting Safety clamps 1/4 inch Hose 1/4 inch white 2.5 inch transparent housing with sponge and grid Filter material: 0.5 litre high-quality carbon granulate
Why is an anti-glyphosate filter needed? Glyphosate on its own, without additives, does not dissolve in water and, due to its molecular size in both reverse osmosis and ultrafiltration. However, most commercially available glyphosate products contain additives that dissolve the glyphosate in the water.As a result, the glyphosate can no longer be retained by the membrane. This makes subsequent filtering necessary. Scope of delivery: 2 x double C-clamps 2 x elbow fittings with thread Angle fitting Safety clamps 1/4 inch Hose 1/4 inch white2.5 inch transparent housing with sponge and grid Filter material: 0.5 litre specially prepared carbon
SmartLine pre-filter set Consisting of 2.5 inch sediment filter and carbon block filter Sediment filter Range of application: For water filtration up to 25°C Sediment removal of sand, silt, rust and suspended solids from drinking water. Properties: Exceptional dirt holding capacity low pressure loss Material: 100% pure polypropylene, without additives Filter material is therefore surfactant-free and contains no resin binders, lubricants, antistatic agents, release agents or other chemical additives, antistatic or separating agents or other chemical additives. Carbon block filter Field of application: for cold water filtration up to 25°C Ideal for use as a reverse osmosis pre-filter or post-filter. Efficiently reduces chlorine, organic substances (VOCs) and certain pesticides. Reduction of chlorine taste and odour Properties: Optimum utilisation of the filter material thanks to the high porosity of the carbon. This prevents the cartridge from clogging before its absorption capacity is exhausted and ensures a low pressure drop. and a low pressure drop is guaranteed. Material: precise combination of mixed granular activated carbon media (GAC) for high adsorption capacity mixed mild media of activated coconut, bituminous carbon and other advanced mixed filter media for effective water treatment
Stylish aluminium frame for the SmartLine series This high-quality aluminium rack was specially developed for the SmartLine series and offers a stable mounting solution. It allows the optional additional filters to be mounted neatly and tidily at the front or rear, This means that functionality and space saving are perfectly combined. The frame impresses with its elegant and slim design, which blends harmoniously into any environment and ensures a tidy, professional look. Note: Filter system and additional filter are not included in the scope of delivery. Dimensions Width: 36 cm Depth: 30 cm Height: 40 cm
Secure and stylish - with our aluminium wall bracket you not only mount your system on the wall, but also give it a modern touch. Choose from four appealing colour combinations the matching , to complement your interior perfectly . This wall bracket is not only an eye-catcher, but also extremely practical. It enables you to your system for maintenance work, filter changes or transport effortlessly to remove and just as easily to reinsert .The robust construction made of aluminium guarantees a secure attachment of your system, while the secondary filters can be fixed directly to the aluminium frame . With two available sizes you will find the perfect fit for your needs:- The 36 cm wide bracket is ideal for a SmartLine and an additional filter.- The 46 cm wide option offers space for a SmartLine and two additional filters.Both sizes have a height including SmartLine of approx. 32 cm and a depth of approx. 16 cm , which is a compact and space-efficient solution . No matter, whether you opt for the smaller or larger variant , our aluminium wall mount is a reliable and aesthetic choice choice for the safe and attractive presentation of your system. The SmartLine and the additional filter are for illustration purposes only and are not part of this article.